Filter sheet rover 20 20x20 cm 25pcs/cs (004206)

Management

Use filter sheets only in a sheet filter machine! Carefully insert the depth filter sheet into the sheet filter, avoiding bumping, warping and crumbling. Do not use a damaged filter sheet! Place the rough surface on the side to be filtered, and the smooth surface on the filtered side. When inserting, make sure that the filtrate side is always facing the filtrate sheet!

Before the first filtration, wash the closed filter with 50 l/m² water at a filtration speed of 1.25 times, which usually takes 10-20 minutes depending on the type of filtration. To avoid leaks, check the filter at maximum operating pressure.

The filter plate is exhausted if the difference in pressure between the inlet and outlet fluid exceeds a certain value (1-1.5 bar depending on porosity and use). For certain uses, it is possible to regenerate the pages.

Destruction

Unused pages can be treated as paper waste. In the case of contaminated sheets, the applicable official regulations for the filtrate must be taken into account at all times.

Storage

The depth filter sheets must be stored in their original packaging in a dry, well-ventilated place, free of foreign substances. The sheets are designed for immediate use, so they must be used within 36 months after delivery.

Filter depth

0.7 μm